HP Printer Setup and Troubleshooting | HP Wireless Printer Setup

HP PRINTER SETUP

When you set up the printer for the very first time, please do remove the printer and all the other materials from the package. For power connect the cable, set preferred control settings, then fit the cartridges filled with ink and in the tray, load the paper. Here are some of the steps for the HP printer setup

 1.PRINTER UNPACKING

Remove all the tape and other packing materials from both inside and outside the printer. Make sure that cartridge glass is not damaged while doing this.

2.CONNECTING POWER CABLE AND SETTING UP PREFERENCES

Connect the plug to a power source. The printer will turn on. Now set the required factors such as language, time and region in the printer's control panel.

3.FITTING THE CARTRIDGES

First, open the cartridge access door. Wait for some time until the cartridge settles itself. The ink cartridge must be kept in an aligned position.

4.LOAD PAPER INTO THE TRAY

Slide in the paper width slowly and gently until they rest lightly against the paper edges. This depends on the printer variant we use.

5.DOWNLOAD/INSTALL APP

This differs for PC and mobile devices. For PC, download the recommended software and select your preferred connection. For mobile, download the app compatible with your printer. The app will you access to the printer.

6.REGISTRATION

First by downloading/ installing the software, register your printer which takes just a few seconds for the process.  A dashboard will be provided where you can address the concerns or issues you face with your printer.

7.INSTANT INK SERVICE

This is a replacement service for the cartridge ink. It is better to use the instant ink service. If you like to know about more queries and suggestions regarding this service go to HP Printer Setup where you can access the service at an instant.